Payment & Shipping Terms:
|Operating Temperature:||-40℃ ~ +85℃||Self-Discharge:||2%/year|
|Time Of Storage:||10 Years At Room Temperature||Rated Voltage:||3.0V|
|Rated Capacity:||1500mAh||Maximum Continuous Current:||1500mA|
lithium CR123A batteries,
CR123A battery pack
Custom CE UN UL CR123A Lithium Batteries 3V , High Voltage CR123A Battery Pack
|Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||1500mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||3000mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
The rated voltage of each battery is 3.0V
We provide the specific energy density up to 225Wh/kg
We provide a wide operating temperature range, from -40℃ to +85℃
Under the condition of normal temperature, the battery self -discharge rate of no more than 2% per year
High capacity, stable performance, stable discharge voltage, and no voltage passivation after long time storage
Battery sealing using the fully sealed structure to reduce the leakage of the battery, make the battery can be stored at room temperature for more than 10 years
The battery safety performance is good, high reliability, and pollution-free, environmental friendly.
2. Main Applications
Life jacket, signal light, buoy, etc.
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
RFID products, road toll transponder, IC cards, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
Storage environment should be as dry as possible.
We need to stop using the battery when the abnormal heat release or leakage occurs.
You need to follow the signs + and - on the batteries and make sure not to reverse. If batteries are wrongly used, they will be hot very fast and can lead the gas and other toxic materials leakage.
They will be hot very fast and can lead the gas and other toxic materials leakage if they are closed to fire.
When changing batteries be aware that batteries of different electrochemical system, grades, or brands should be not mixed. If different batteries are used or in case of using old and new batteries together this can discharge batteries due to different voltage or capacity. This can cause toxic material or gas leakage and/or violent rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
The water explosion will be caused if you throw the batteries into the water.
Contact Person: Angela