|No.1 Special Taizhong Avenue, Gaoqiao Industrial Park, Wujiashan Economic Development Zone, Wuhan, Hubei, Chinaemail@example.com|
Payment & Shipping Terms:
|Maximum Continuous Current:||500mA||All-up Weight:||40g|
|Full-size(mm):||Φ18.8×50.5+Φ15.1×21.0||Type:||ER18505 + UPC1520|
|Nominal Voltage:||3.6V||Rated Capacity:||4000mAh|
ER18505 + UPC1520 instead of lithium thionyl chloride spiral cell with long life
Battery storage temperature is less than 30 degrees, relative humidity is less than 75%
See drawing on pag
2. Battery Characteristic
An auxiliary battery capacitor providing large pulse current.
The combination of UPC and lithium SOCl2 bobbin battery is more safety, and the combination can provide large discharge current. It’s a good choice to replace spiral battery.
|High Voltage||Single battery nominal voltage up to 3.6V, the working voltage varies with the load, generally between 3.3V ~ 3.6V|
|High Energy Density||Specific energy density up to 240Wh/kg|
|Wide Operating Temperature Range||The battery with a strong adaptability to temperature can be in work between -55℃~ +85℃|
|Stable Operating Voltage||Battery voltage is very stable during work, more than 90% of the capacitycould be outputon a fixed high voltage platform|
|Long Shelf Life||
1. The battery self-discharge less than 2% per year at room temperature
2. Battery sealing using the fully sealed structure to reduce the leakage of the battery, make the battery can be stored at room temperature for more than 10 years
3. The working principle of UPC
Lithium SOCl2bobbin battery and UPC in parallel, high load of pulse completed by the Ultra Pulse Capacitor, not affected by the passivation.High load pulse bycompleted UPC, ahead of the next pulse lithium battery recharge UPC, after a full charge the discharge capacity ofUPC is constant, so on, until the battery capacity is completely consumed. In this way, we can guarantee the battery packa long life under the high load capacity.
4. Product application areas
5. FAQS of General Safety Instructions
In order to store the battery, the environment should be dry enough.
The battery should be stopped to using when the abnormal heat release or leakage occurs.
The manual should be read before the battery is used.
Follow the signs + and - shown on the batteries and appliances. Do not reverse battery. If batteries are put in the wrong way they are bound to become hot very quickly. This can lead to gas or toxic material leakage and/or to a violent rupture.
If + and - polarity of battery is connected directly, it causes a short circuit and this may lead toxic gas and materials leakage or a big rupture.