Payment & Shipping Terms:
|Type:||Primary Battery||Sealing Type:||Hermetic Sealing|
|Storage Temperature:||≤30℃||Max Size(mm):||Φ14.5×25.0|
un lithium battery
Non Rechargeable Li MnO2 Cell CR14250SE Lithium Battery Hermetic Sealing Type
|Battery discharged at continuous current 0.5mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||7mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||70mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Single cell rated voltage 3.0V
The specific energy density of each battery is 270Wh/kg
We provide a wide operating temperature range, from -40℃ to +85℃
The battery self-discharge less than 2% per year at room temperature
High capacity, stable performance, stable discharge voltage, and no voltage passivation after long time storage
Hermetic welding sealing to reduce the leakage for extending the shelf life to more than 10 years
The battery safety performance is good, high reliability, and pollution-free, environmental friendly.
2. Main Applications
Wireless telecommunication devices
Life jacket, signal light, buoy, etc.
Automatic meters (water meter, electric meter, gas meter), conventional meters, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
The battery should be kept as dryly as possible when they are in storage.
When the abnormal heat release or leakage occurs, the battery is not able to be continued to use.
You need to keep battery out of the children. Please call to a physician immediately if it is swallowed by children.
Follow the signs + and - shown on the batteries and appliances. Do not reverse battery. If batteries are put in the wrong way they are bound to become hot very quickly. This can lead to gas or toxic material leakage and/or to a violent rupture.
Do not deform the batteries. Batteries are not to be crushed, drilled into or damaged in any other way. This can lead to toxic material or gas leakage or/and violent rupture.
The batteries of different electrochemical system, grades, or brands can’t be mixed because it would lead toxic material or gas leakage and/or a big rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
Contact Person: Angela