Payment & Shipping Terms:
|Sealing Type:||Hermetic Sealing||Cellpacking:||304 Stainless Steel|
|Energy Density:||225Wh/Kg||Self-discharge Rate:||≤2%/year|
lithium mno2 battery,
un lithium battery
Low Temperature CR17335 Lithium Battery High Current Hermetic Sealing Type
|Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||1500mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||3000mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Single battery nominal voltage up to 3.0V
Specific energy density up to 225Wh/kg
Battery working temperature range from -40℃ to +85℃
The battery self-discharge less than 2% per year at room temperature
High capacity, stable performance, stable discharge voltage, and no voltage passivation after long time storage
Hermetic welding sealing to reduce the leakage for extending the shelf life to more than 10 years
The battery safety performance is good, high reliability, and pollution-free, environmental friendly.
2. Main Applications
Wireless telecommunication devices
Cardiac pacemaker, respirator, oxygenator, inspection devices, monitoring devices, infusion pump, etc.
RFID products, road toll transponder, IC cards, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
Storage environment should be as dry as possible.
When the abnormal heat release or leakage occurs, the battery is not able to be continued to use.
The manual should be read before the battery is used.
You need to follow the signs + and - on the batteries and make sure not to reverse. If batteries are wrongly used, they will be hot very fast and can lead the gas and other toxic materials leakage.
The batteries are able to be deformed or drilled into or damaged because the toxic materials or gas leakage may lead a big rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
Battery disposal method should be in accordance with local and state regulations.
Contact Person: Angela