Payment & Shipping Terms:
|Classification:||Bobbin||Operating Life:||10 Years At Room Temperature|
|Cellpacking:||304 Stainless Steel||Working Voltage:||3.3V~3.6V|
|Max Size(mm):||Φ34.2×61.5||Max Continuous Current(mA):||300|
high capacity lithium batteries,
industrial lithium batteries
Lithium Thionyl Chloride ER34615 Lithium Battery 18000mAh With Low Passivation Effect
|Battery discharged at continuous current 6.5mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.6 V|
|Maximum Continuous Current||300mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||600mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-55℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
The rated voltage of the single battery is 3.6V, the operating voltage varies with the load, normally between 3.3V and 3.6V
We offer the specific energy density of 617Wh/kg
The battery can be in work between -55℃ ~ +85℃
Stable operating voltage, more than 90% of the capacity could be output with a fixed voltage
The battery self-discharge less than 2% per year at room temperature
Battery sealing using the fully sealed structure to reduce the leakage of the battery, make the battery can be stored at room temperature for more than 10 years
2. Main Applications
Ground force (individual soldier system, infantry fighting vehicles, robot soldier), navy (submarine, underwater robot), air force (fighters, unmanned surveillance drones), aerospace (satellites, shuttles), etc.
Automatic meters (water meter, electric meter, gas meter), conventional meters, etc.
Smoke detectors, security alarms, seismometers, locking system, monitoring system, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
Storage environment should be as dry as possible.
When the abnormal heat release or leakage occurs, the battery is not able to be continued to use.
The manual should be read before the battery is used.
You need to follow the signs + and - on the batteries and make sure not to reverse. If batteries are wrongly used, they will be hot very fast and can lead the gas and other toxic materials leakage.
The batteries are able to be deformed or drilled into or damaged because the toxic materials or gas leakage may lead a big rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
Battery disposal method should be in accordance with local and state regulations.
Contact Person: Tina