Payment & Shipping Terms:
|All-up Weight:||14g||Peak Pulsing Current:||1500mA|
|Storage Temperature:||≤30℃||Storage Humidity:||≤75%RH|
high energy density battery,
lithium cell battery
Lithium Manganese Dioxide High Energy Density Battery Wide Operating Temperature Range
|Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||800mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||1500mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Single battery nominal voltage up to 3.0V
Specific energy density up to 192Wh/kg
We provide a wide operating temperature range, from -40℃ to +85℃
The battery self-discharge less than 2% per year at room temperature
High capacity, stable performance, without passivation
Hermetic welding sealing to reduce the leakage for extending the shelf life to more than 10 years
High safety performance, reliable and environmental friendly
2. Main Applications
Wireless telecommunication devices
Automatic meters (water meter, electric meter, gas meter), conventional meters, etc.
RFID products, road toll transponder, IC cards, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
When the abnormal heat release or leakage occurs, the battery is not able to be continued to use.
The manual should be read before the battery is used.
The battery should be kept out of the children firstly. If swallowed by children, please contact a physician at once.
You need to follow the signs + and - on the batteries and make sure not to reverse. If batteries are wrongly used, they will be hot very fast and can lead the gas and other toxic materials leakage.
They are going to be hot in very short time and it will lead the leakage of gas and toxic materials which may cause a big rupture.
If + and - polarity of battery is connected directly, it causes a short circuit and this may lead toxic gas and materials leakage or a big rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
Contact Person: Angela