Payment & Shipping Terms:
|Type:||Primary Battery||Cellpacking:||Aluminum Laminated Film|
|Operating Temperature:||-40℃~+60℃||Nominal Voltage(V):||3.0|
|Max Size(mm):||2.5×36×66||Max Continuous Current(mA):||200|
CP223565 Lithium Pouch Cell,
Li MnO2 Pouch Cell
High Energy Density Li-MnO2 Soft Battery With Flexible Physical Size
|Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||200mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||500mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +60℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
The rated voltage of each battery is 3.0V
We provide the specific energy density up to 346Wh/kg, 50% higher than the steel-shelled lithium cell of the same weight
We provide a wide operating temperature range, from -40℃ to +60℃
The battery self-discharge less than 2% per year at room temperature
There is no voltage passivation problem, also need not activated after long time storage, install-and-play, ultra-high maintenance-free features
Fit for the modern light & handy electronic products
Overall dimensions can be customized according to different demands, short new product development cycle, fully meeting customers personalized needs
The most reliable cell with the best safety performance; able to bear cruel tests without any protection such as short circuit, puncturing, etc.
2. Main Applications
Smoke detectors, security alarms, seismometers, locking system, monitoring system, etc.
Ground force (individual soldier system, infantry fighting vehicles, robot soldier), navy (submarine, underwater robot), air force (fighters, unmanned surveillance drones), aerospace (satellites, shuttles), etc.
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
The battery should be kept as dryly as possible when they are in storage.
We need to stop using the battery when the abnormal heat release or leakage occurs.
You need to keep battery out of the children. Please call to a physician immediately if it is swallowed by children.
They are going to be hot in very short time and it will lead the leakage of gas and toxic materials which may cause a big rupture.
The batteries are able to be deformed or drilled into or damaged because the toxic materials or gas leakage may lead a big rupture.
When changing batteries be aware that batteries of different electrochemical system, grades, or brands should be not mixed. If different batteries are used or in case of using old and new batteries together this can discharge batteries due to different voltage or capacity. This can cause toxic material or gas leakage and/or violent rupture.
The battery should be stopped to using when the abnormal heat release or leakage occurs.
Contact Person: Angela