Payment & Shipping Terms:
|Model:||ER14335 + UPC1520||Full-size(mm):||Φ14.5×33.5+Φ15.1×21.0|
|All-up Weight:||22g||Nominal Voltage:||3.6V|
|Maximum Continuous Current:||65mA||Rated Capacity:||1650mAh|
lithium primary battery,
lithium battery pack
ER14335 + UPC1520 instead of spiral battery pulse cycle count up to 100000 times
|Battery discharged at continuous current 0.85mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Maximum Continuous Current||65mA|
|Battery with minimum 50% rated capacity discharged atambient temperature 23±2℃|
|Maximum Pulse Discharge Current||130mA|
|Battery with minimum 50% rated capacity discharged at maxpulse for 3 seconds after 27seconds break. Ambient temperature23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-55℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
An auxiliary battery capacitor designed for large pulse current.
The combination of UPC and lithium SOCl2 bobbin battery is more safety, and the combination can provide large discharge current. It’s a good choice to replace spiral battery.
Low resistance, high power density, suitable for high current pulse;
Long life, using pulse cycle count up to 100000 times;
Good low temperature performance, wide temperature range from 40 ℃ to + 70 ℃;
Good safety performance.
The rated voltage of each battery is 3.6V, the operating voltage varies with the load, normally between 3.3V and 3.6V
The specific energy density of each battery is 456Wh/kg
The battery can be in work between -55℃~ +85℃
Battery voltage is very stable during work, more than 90% of the capacitycould be outputon a fixed high voltage platform
Under thecondition of normal temperature, the battery self -discharge rate of no more than 2% per year
Hermetic welding sealing to reduce the leakage for extending the shelf life to more than 10 years
2. The working principle of UPC
Lithium SOCl2bobbin battery and UPC in parallel, high load of pulse completed by the Ultra Pulse Capacitor, not affected by the passivation.High load pulse bycompleted UPC, ahead of the next pulse lithium battery recharge UPC, after a full charge the discharge capacity ofUPC is constant, so on, until the battery capacity is completely consumed. In this way, we can guaranteethe battery packa long life under the high load capacity.
3. Product application areas
|Smart meters||clock battery||
|intelligent transportation ETC||The OBU unit||
High voltage fault indicator
TPMS automobile tire pressure monitoring
4. FAQS of General Safety Instructions
In order to store the battery, the environment should be dry enough.
The battery should be kept out of the children firstly. If swallowed by children, please contact a physician at once.
They are going to be hot in very short time and it will lead the leakage of gas and toxic materials which may cause a big rupture.
If + and - polarity of battery is connected directly, it causes a short circuit and this may lead toxic gas and materials leakage or a big rupture.
The batteries are not able to be put or thrown into the water because it would cause explosion.
You can’t charge the primary batteries as it would lead to gas or toxic material leakage.
Battery disposal method should be in accordance with local and state regulations.
Contact Person: Angela