Payment & Shipping Terms:
|Storage Humidity:||≤ 75%RH||Working Temperature:||From -40℃ To +85℃|
|Time Of Storage:||More Than 10 Years||Automatic Discharge Rate:||Less Than 2%/year|
|Maximum Scale Surge Current:||1500mA||Storage Temperature:||≤ 30℃|
lithium mno2 battery,
CR15270 Li-MnO2 Battery Lithium Manganese Dioxide Cell Stable Performance
|Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||800mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||1500mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Single cell rated voltage 3.0V
The specific energy density of each battery is 184Wh/kg
The battery can be in work between -40℃ ~ +85℃
Under the condition of normal temperature, the battery self -discharge rate of no more than 2% per year
High capacity, stable performance, without passivation
Battery sealing using the fully sealed structure to reduce the leakage of the battery, make the battery can be stored at room temperature for more than 10 years
High safety performance, reliable and environmental friendly
2. Main Applications
Life jacket, signal light, buoy, etc.
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
RFID products, road toll transponder, IC cards, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
The battery should be stopped to using when the abnormal heat release or leakage occurs.
The battery should be kept out of the children firstly. If swallowed by children, please contact a physician at once.
The batteries may be incinerated or mutilated if they are closed to the fire and it leads a possible burst or they may release the toxic materials.
The batteries can’t be short circuit. If positive and negative polarity of a battery is directly connected, this may cause a short circuit and this may lead to toxic materials or gas leakage and/or violent rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
The water explosion will be caused if you throw the batteries into the water.
During the batteries disposal, you need to follow the local and state regulations.
Contact Person: Tina