Payment & Shipping Terms:
|Energy Density:||206Wh/Kg||Self-discharge Rate:||≤2%/year|
|Cellpacking:||304 Stainless Steel||Certification:||UN/CE/UL|
high energy density battery,
lithium cell battery
CR14335SE Lithium Manganese Dioxide Battery 304 Stainless Steel Cellpacking
|Battery discharged at continuous current 0.5mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||8mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||800mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|-40℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Single battery nominal voltage up to 3.0V
Specific energy density up to 206Wh/kg
We provide a wide operating temperature range, from -40℃ to +85℃
The battery self-discharge less than 2% per year at room temperature
High capacity, stable performance, stable discharge voltage, and no voltage passivation after long time storage
Battery sealing using the fully sealed structure to reduce the leakage of the battery, make the battery can be stored at room temperature for more than 10 years
High safety performance, reliable and environmental friendly
2. Main Applications
Smoke detectors, security alarms, seismometers, locking system, monitoring system, etc.
Ground force (individual soldier system, infantry fighting vehicles, robot soldier), navy (submarine, underwater robot), air force (fighters, unmanned surveillance drones), aerospace (satellites, shuttles), etc.
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
The Battery should be stored in dry environment.
When the abnormal heat release or leakage occurs, the battery is not able to be continued to use.
The manual should be read before the battery is used.
The battery should be kept out of the children firstly. If swallowed by children, please contact a physician at once.
Follow the signs + and - shown on the batteries and appliances. Do not reverse battery. If batteries are put in the wrong way they are bound to become hot very quickly. This can lead to gas or toxic material leakage and/or to a violent rupture.
Do not deform the batteries. Batteries are not to be crushed, drilled into or damaged in any other way. This can lead to toxic material or gas leakage or/and violent rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.
Contact Person: Angela