Payment & Shipping Terms:
|Storage Humidity:||≤ 75%RH||Maximum Continuous Current:||1500mA|
|Peak Pulsing Current:||2000mA||Storage Temperature:||≤30℃|
|Nominal Voltage:||3.0V||Nominal Capacity:||3000mAh|
3V 3000mAh Lithium Pouch Battery,
CP505050 Lithium Pouch Battery
3V Primary Li-MnO2 Soft Battery 3000mAh CP505050 for Alarm Systems
|Battery discharged at continuous current 5mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||1500mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||2000mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +60℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Each cell nominal voltage up to 3.0V
The specific energy density of each battery is 391Wh/kg, more than 50% higher than steel shell lithium battery under the condition of the same weight
The battery with a strong adaptability to temperature can be in work between -40℃ ~ +60℃
The battery self-discharge less than 2% per year at room temperature
There is no voltage passivation problem, also need not activated after long time storage, install-and-play, ultra-high maintenance-free features
Fit for the modern light & handy electronic products
Overall dimensions can be customized according to different demands, short new product development cycle, fully meeting customers personalized needs
The most reliable cell with the best safety performance; able to bear cruel tests without any protection such as short circuit, puncturing, etc.
2. Main Applications
Automatic meters (water meter, electric meter, gas meter), conventional meters, etc.
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
Cardiac pacemaker, respirator, oxygenator, inspection devices, monitoring devices, infusion pump, etc.
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
The battery should be kept as dryly as possible when they are in storage.
We need to stop using the battery when the abnormal heat release or leakage occurs.
Keep battery out of the children. If swallowed, please contact a physician at once.
When you put the battery into the devices, you need to follow the signs + and -. If they are put in the wrong way, they are going to be hot in very short time and it will lead the leakage of gas and toxic materials which may cause a big rupture.
If + and - polarity of battery is directly connected, it is called short circuit and it will lead the leakage of gas or materials or a violent rupture.
The batteries are not able to put or thrown into the water because it would cause explosion.
During the batteries disposal, you need to follow the local and state regulations
Contact Person: Angela