Payment & Shipping Terms:
|Type:||Primary Lithium Battery Pouch Cell||Cellpacking:||Aluminum Laminated Film|
|Operating Temperature:||-40℃~+60℃||Nominal Voltage(V):||3.0|
|Max Size(mm):||2.5×36×66||Max Continuous Current(mA):||200|
|Nominal Capacity:||750mAh||Maximum Pulse Discharge Current:||500mA|
Manganese Dioxide Lithium Pouch Cell,
3.0V Lithium Pouch Cell,
CP223565 Lithium Pouch Cell
Custom 3.0V Manganese Dioxide Lithium Pouch Cell For Long Life Wireless Electronic Shelf Label
|Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||200mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||500mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +60℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Nominal voltage up to 3.0 V
Energy density up to 450Wh/kg
-40°C to +70°C
Self discharge rate is less than 2% per year at room temperature
No passivation effect, instant install-and-use, maintenance free
Battery of variable dimensions can be selected to fit in the customer’s design
Custom batteries and battery packs are also available
The structure of the battery offers greater safety to meet customer’s requirement for special
2. Main Applications
Smoke detectors, security alarms, seismometers, locking system, monitoring system, etc.
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
Do not charge. When this battery is charged, gas is generated inside and raises internal pressure, resulting in fire, heat generation, leakage or bursting.
Do not dispose of in fire, disassemble or heat in any way. It will damage the insulation materials and the safety vent resulting in fire, heat generation, leakage or bursting.
Insert batteries properly. Keep polarities in the correct position aligning + and - correctly for ALL batteries to avoid leakage or bursting.
Do not short-circuit. If the + and - come into contact with metal objects, short circuiting occurs resulting in heat generation or bursting. When carrying or storing batteries, avoid direct contact with metal objects such as bracelets or key chains by putting them in a separate bag.
4. Manufacturing Advantages
Contact Person: Sandy