Payment & Shipping Terms:
|Max Pulse Current(mA):||100mA||Max Size(mm):||Φ14.5×50.5|
|Nominal Capacity:||1800mAh||Maximum Continuous Current:||10mA|
lithium mno2 battery,
un lithium battery
350Wh/kg CR14505SE AA Bobbin Glass to metal Seal 3V Primary Li-MnO2 Batteries 100mA
|Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃|
|Nominal Voltage||3.0 V|
|Maximum Continuous Current||10mA|
|Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃|
|Maximum Pulse Discharge Current||100mA|
|Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃|
Temperature ≤ 30℃
Humidity ≤ 75%RH
|Operating Temperature||-40℃ to +85℃|
|Battery Dimension||See drawing on pag|
|Max self-discharged rate at ambient temperature 23±2℃|
|Shelf Life||10 years|
|Ambient temperature 23±2℃|
1. Battery Characteristic
Single cell rated voltage 3.0V
The specific energy density of each battery is 245Wh/kg
We provide a wide operating temperature range, from -40℃ to +85℃
The battery self-discharge less than 2% per year at room temperature
2. Main Applications
Smoke detectors, security alarms, seismometers, digital door lock system, etc.
Asset tracking toll-gate transponders smart home bike-sharing IC cards GPS, TPMS, RFID, etc.
3.HCB Battery Co., Ltd. was founded in 2001. As a leading primary lithium battery manufacturer and solution provider in China, HCB remains dedicated to leading the R&D and manufacturing of various types of primary lithium batteries.
Lithium is the lightest of metals and it floats on water. It also has the greatest electrochemical potential which makes it one of the most reactive of metals. These properties give Lithium the potential to achieve very high energy and power densities permitting batteries with very long useful life and small cell packages.
Do not charge. When this battery is charged, gas is generated inside and raises internal pressure, resulting in fire, heat generation, leakage or bursting.
Do not dispose of in fire, disassemble or heat in any way. It will damage the insulation materials and the safety vent resulting in fire, heat generation, leakage or bursting.
Insert batteries properly. Keep polarities in the correct position aligning + and - correctly for ALL batteries to avoid leakage or bursting.
Do not short-circuit. If the + and - come into contact with metal objects, short circuiting occurs resulting in heat generation or bursting. When carrying or storing batteries, avoid direct contact with metal objects such as bracelets or key chains by putting them in a separate bag.
Contact Person: Angela